MacBook Logic Board Repair Dubai - Component-Level

• •MacBook won't power on - dead PMIC or input rail
• •Charges to 1% then dies - bad charging IC (BQ chip)
• •Black screen but fans run - GPU or display rail fault
• •USB-C port dead but charging works - TB controller
• •Random shutdowns under load - bad MOSFET or VRM
• •Liquid spill recovered to a partial fault - corrosion under a chip
• •T2 chip lockup on 2018+ Intel MacBooks
• •Backlight dead but image visible with torch - backlight FET

1. 1

   Schematic-driven diagnosis

   We use the actual board schematic, scope the relevant rails, identify the failed component within 24 hours.

2. 2

   Open quote

   Voice note with the diagnosis, the price, and the realistic success rate. You sign off before any work.

3. 3

   Microscope rework

   Failed chip removed under stereo microscope, pads cleaned with no-clean flux, replacement chip reballed and placed with controlled hot-air profile.

4. 4

   48 hr burn-in

   Stress test under sustained load - CPU, GPU, ports, charging cycles. Catches intermittents before delivery.

FAQ

• What's the difference between component-level repair and board swap?

  Component-level: we identify the failed chip (a USD 5-30 part), desolder it under microscope, install a new one. Board swap: throw out the entire AED 4,000+ board and fit a new one. Same outcome on the symptom, very different cost - and only component-level keeps your original board (and your T2-paired SSD on Intel models).

• Can you fix any logic board fault?

• Why does this take 3-5 days?

• Will my data survive?

• What chips do you commonly replace?

• Is reflow ever a viable fix?

• Have you fixed liquid-damaged boards before?

Related reading: Component-level vs board-swap repair: a MacBook owner's guide